Skip Navigation

Designed by George Nelson in 1952

Herman Miller® Nelson® Saucer® Wall Sconce

$49500

Free Shipping! Ships in 4 weeks.

Quantity:

The Nelson® Saucer® Wall Sconce is part of the classic George Nelson Bubble Lamp Series, originally designed in 1952. This wall sconce is handsomely constructed with a 2 inch thick solid walnut wall-mount and a brushed-nickel steel arm that extends out approximately 14 inches. With the swivel feature on the steel arm and a counterweight on the cord, this lamp is more adjustable than one might expect. This clever design allows one to adjust the sconce from left-to-right and up-and-down without having to change its position on the wall. An elegant white shade is stretched over a wire frame. A 12′ power cord with plug is included. UL listed. Also choose from a Cigar, Ball or Pear Nelson Sconce.

 

Dimensions
Overall Depth: 23″ (from wall to end of shade)
Arm Height: 16.75″
Saucer Lamp Shade:17”W x 7″H
14 inch brushed-nickel steel arm

Bulb
Type A Standard Bulb – up to 150 watts
Light bulb not included.

Warranty
1 year

Cleaning Instructions
With regular care and maintenance, your Herman Miller furniture will provide years of superior performance and satisfaction. To maintain the finish quality of your Herman Miller product, please follow the cleaning procedures provided below.

The instructions for the care and maintenance of Herman Miller products are provided to you as a service. No warranty is implied since results may vary.

Lamp Shade
Use a feather duster, a clean soft white cloth, or vacuum with a clean soft brush attachment as needed. For stubborn stains, clean the surface using a soft clean white absorbent cloth with a solution of mild soap and warm water. Wipe down surfaces with the damp cloth and dry with a clean soft white cloth.

Avoid using glass cleaners, abrasive cleaning compounds, ammonia, or bleach; they may damage the surface of the plastic and result in discoloration. Make sure cleaning materials are free of grit and other foreign materials.

Metal Base
Wash coated metal surfaces with a soft cloth soaked in detergent and warm water; rinse thoroughly and dry. Remove scuff marks with pre-softened paste wax, following the instructions on the label. After polishing, apply a pre-softened automotive paste wax to restore original sheen.

Do not use abrasive, acid, alcohol–based, or solvent–based cleaners; they may damage the paint finish.